Large-area gateway
SpotView Gateway
One gateway for a whole large area
Part numberID-SPOTVIEW
The SpotView Gateway is an active antenna array that covers large areas from the ceiling. Instead of 4 antenna ports, it reads through 9 sectors with dual linear polarization antennas, which gives 18 distinct beams. Its built-in Identix reader is based on the Impinj E710 chip and has the same specs as the EZ700. It covers about 200 m² when installed at about 3.6 m high.
Features
- Wide-area monitoring
- Transitioning applications between two opposite read zones
- 9 reading sectors, each one readable separately
- Dual linear polarization antennas with 18 distinct beams, instead of 4 antenna ports
- Built-in high-performance Identix reader on the Impinj E710 chip, with the same specs as the EZ700
- Ethernet and Wi-Fi connectivity
- 802.11af/at PoE power supply
- Small footprint: 300 × 300 × 30 mm
Applications
- Wide-area monitoring
- Transition between two opposite read zones
Technical specifications
| RFID standard | UHF RAIN RFID reader, ISO 18000-63 |
|---|---|
| Frequency band | 865 MHz to 928 MHz |
| Max. RF output power | +33 dBm (max) |
| RX sensitivity | -86 dBm (max) |
| Read rate | up to 1,100 tags/s |
| RFID chipset | Impinj E710 |
| GEN2X | Impinj GEN2X support |
| Coverage sectors | 9 sectors |
|---|---|
| Coverage area | About 200 m² when installed at about 3.6 m high |
| Polarization | Dual linear, 18 distinct beams |
| Connectivity | Ethernet and Wi-Fi |
|---|
| Power source | PoE 802.3af/at |
|---|
| Dimensions | 300 × 300 × 30 mm |
|---|
How it covers the area
One gateway on the ceiling covers a large area with 9 overlapping sectors. Illustrative diagrams, not to scale.
Illustrative